OK, so than make sure that "set permissions" is off before transfer.

martin wrote:

First, can you confirm my assumption that you use synchronization?

no - i'm not using sync in this case. I'm just dragging and dropping files from local to remote path

First, can you confirm my assumption that you use synchronization?

i've tried every combination of upload settings, and i'm unable to upload/replace without encountering the dialogue box after each transfer.

Can you suggest anything i might try to resolve the problem?

Out of curiosity, I tried the same thing with FileZilla and it works ok, but there are a number of features FileZilla doesnt have which WinSCP does. Suffice to say I'd like to continue to use WinSCP.

Any suggestions?

thanks in advance.

B

boxing_surfer wrote:

I can understand the part where it says "the server does not support the operation", but I'm confused about why the client is asking the server to do anything with timestamp or permission when both options are explicitly disabled.

You have disabled option "preserve timestamp", but not not "set permissions". Unless you are using synchronize command, which forces the "preserve timestamp", because it won't work without it.

Also, shouldn't the option to 'ignore permissions errors' cause such a condition to be handled gracefully??

Only if the server replies "access denied". But it replies "operation not supported".

I'm getting this problem too.

Client:
-------
WinSCP 4.0.2 (build 344) on WinXP SP2

Server:
-------
VanDyke VShell 2.6.4 (build 448) on Windows Server 2003 SP2
Using SFTP-4 Protocol
Session protocol = SSH-2
SSH implementation = VShell_2_6_4_448 VShell
Encryption algorithm = aes
Compression = No
File transfer protocol = SFTP-4

Can change permissions = No
Can change owner/group = Yes
Can execute arbitrary command = No
Can create symlink/hardlink = Yes/No
Can lookup user groups = No
Can duplicate remote files = No
Can check available space = Yes
Can calculate file checksum = No
Native text (ASCII) mode transfers = Yes
------------------------------------------------------------

My WinSCP copy options are set up as follows:

set permissions = no
preserve timestamps = no
ignore permissions errors = yes

but when i try to upload, overwriting existing files i get this:

* 2007-06-15 15:26:08.017 Error code: 8
* 2007-06-15 15:26:08.017 Error message from server (en): The request is not supported.
* 2007-06-15 15:26:08.017 Request code: 9
. 2007-06-15 15:26:08.017 Asking user:
. 2007-06-15 15:26:08.017 Upload of file 'AGI374.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on 'Ignore permission errors' option. ("The server does not support the operation.
. 2007-06-15 15:26:08.017 Error code: 8
. 2007-06-15 15:26:08.017 Error message from server (en): The request is not supported.
. 2007-06-15 15:26:08.017 Request code: 9")
* 2007-06-15 15:26:09.908 (EScpSkipFile) Upload of file 'AGI374.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on 'Ignore permission errors' option.
* 2007-06-15 15:26:09.908 The server does not support the operation.
* 2007-06-15 15:26:09.908 Error code: 8
* 2007-06-15 15:26:09.908 Error message from server (en): The request is not supported.
* 2007-06-15 15:26:09.908 Request code: 9

Definitely not a permissions problem on the destination file, as I am the owner and have full control. I've double checked this.

I can understand the part where it says "the server does not support the operation", but I'm confused about why the client is asking the server to do anything with timestamp or permission when both options are explicitly disabled.

Also, shouldn't the option to 'ignore permissions errors' cause such a condition to be handled gracefully??


FULL LOG
--------

. 2007-06-15 15:26:02.189 Copying 7 files/directories to remote directory "/XYZ_Upload/testing/"
. 2007-06-15 15:26:02.189 PrTime: Yes; PrRO: Yes; Rght: rw-r--r--; PrR: No (Yes); FnCs: N; RIC: 01; Resume: S (102400); CalcS: Yes; Mask: *.*
. 2007-06-15 15:26:02.189 TM: M; ClAr: No; ExclM(No):
. 2007-06-15 15:26:02.189 AscM: *.*html; *.htm; *.txt; *.php*; *.cgi; *.c; *.cpp; *.h; *.pas; *.bas; *.tex; *.pl; .htaccess; *.xtml; *.css; *.cfg; *.ini; *.sh; *.xml
. 2007-06-15 15:26:02.189 File: "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\AGI374.xls"
. 2007-06-15 15:26:02.221 Copying "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\AGI374.xls" to remote directory started.
. 2007-06-15 15:26:02.221 Binary transfer mode selected.
. 2007-06-15 15:26:02.221 Checking existence of file.
> 2007-06-15 15:26:02.221 Type: SSH_FXP_LSTAT, Size: 45, Number: 815623
< 2007-06-15 15:26:02.221 Type: SSH_FXP_STATUS, Size: 34, Number: 815364
. 2007-06-15 15:26:02.221 Discarding reserved response
< 2007-06-15 15:26:02.236 Type: SSH_FXP_ATTRS, Size: 112, Number: 815623
. 2007-06-15 15:26:02.236 Checking existence of partially transfered file.
> 2007-06-15 15:26:02.236 Type: SSH_FXP_LSTAT, Size: 54, Number: 815879
< 2007-06-15 15:26:02.252 Type: SSH_FXP_STATUS, Size: 62, Number: 815879
< 2007-06-15 15:26:02.252 Status/error code: 2
. 2007-06-15 15:26:02.252 Asking user:
. 2007-06-15 15:26:02.252 Remote file 'AGI374.xls' already exists. Overwrite?
. 2007-06-15 15:26:02.252
. 2007-06-15 15:26:02.252 New: 2860544 bytes, 13/06/2007 14:47:58
. 2007-06-15 15:26:02.252 Existing: 2860544 bytes, 15/06/2007 16:19:28 ()
> 2007-06-15 15:26:04.330 Type: SSH_FXP_REMOVE, Size: 41, Number: 816141
< 2007-06-15 15:26:04.346 Type: SSH_FXP_STATUS, Size: 34, Number: 816141
< 2007-06-15 15:26:04.346 Status/error code: 0
. 2007-06-15 15:26:04.346 Opening remote file.
> 2007-06-15 15:26:04.346 Type: SSH_FXP_OPEN, Size: 67, Number: 816387
< 2007-06-15 15:26:04.346 Type: SSH_FXP_HANDLE, Size: 13, Number: 816387
> 2007-06-15 15:26:04.361 Type: SSH_FXP_WRITE, Size: 4121, Number: 816902
. 2007-06-15 15:26:07.955 347 skipped SSH_FXP_WRITE, SSH_FXP_READ, SSH_FXP_DATA and SSH_FXP_STATUS packets.
> 2007-06-15 15:26:07.955 Type: SSH_FXP_CLOSE, Size: 13, Number: 861956
< 2007-06-15 15:26:07.970 Type: SSH_FXP_STATUS, Size: 34, Number: 860934
< 2007-06-15 15:26:07.986 Type: SSH_FXP_STATUS, Size: 34, Number: 861190
< 2007-06-15 15:26:08.002 Type: SSH_FXP_STATUS, Size: 34, Number: 861446
< 2007-06-15 15:26:08.017 Type: SSH_FXP_STATUS, Size: 34, Number: 861702
< 2007-06-15 15:26:08.017 Type: SSH_FXP_STATUS, Size: 34, Number: 861956
< 2007-06-15 15:26:08.017 Status/error code: 0
> 2007-06-15 15:26:08.017 Type: SSH_FXP_RENAME, Size: 86, Number: 862226
< 2007-06-15 15:26:08.017 Type: SSH_FXP_STATUS, Size: 34, Number: 862226
< 2007-06-15 15:26:08.017 Status/error code: 0
> 2007-06-15 15:26:08.017 Type: SSH_FXP_SETSTAT, Size: 66, Number: 816649
< 2007-06-15 15:26:08.017 Type: SSH_FXP_STATUS, Size: 49, Number: 816649
< 2007-06-15 15:26:08.017 Status/error code: 8, Message: 816649, Server: The request is not supported. , Language: en
* 2007-06-15 15:26:08.017 (ETerminal) The server does not support the operation.
* 2007-06-15 15:26:08.017 Error code: 8
* 2007-06-15 15:26:08.017 Error message from server (en): The request is not supported.
* 2007-06-15 15:26:08.017 Request code: 9
. 2007-06-15 15:26:08.017 Asking user:
. 2007-06-15 15:26:08.017 Upload of file 'AGI374.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on 'Ignore

permission errors' option. ("The server does not support the operation.
. 2007-06-15 15:26:08.017 Error code: 8
. 2007-06-15 15:26:08.017 Error message from server (en): The request is not supported.
. 2007-06-15 15:26:08.017 Request code: 9")
* 2007-06-15 15:26:09.908 (EScpSkipFile) Upload of file 'AGI374.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists,

turn on 'Ignore permission errors' option.
* 2007-06-15 15:26:09.908 The server does not support the operation.
* 2007-06-15 15:26:09.908 Error code: 8
* 2007-06-15 15:26:09.908 Error message from server (en): The request is not supported.
* 2007-06-15 15:26:09.908 Request code: 9
. 2007-06-15 15:26:09.924 File: "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\Alt120.xls"
. 2007-06-15 15:26:09.924 Copying "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\Alt120.xls" to remote directory started.
. 2007-06-15 15:26:10.064 Binary transfer mode selected.
. 2007-06-15 15:26:10.064 Checking existence of file.
> 2007-06-15 15:26:10.064 Type: SSH_FXP_LSTAT, Size: 45, Number: 862471
< 2007-06-15 15:26:10.080 Type: SSH_FXP_ATTRS, Size: 112, Number: 862471
. 2007-06-15 15:26:10.080 Checking existence of partially transfered file.
> 2007-06-15 15:26:10.080 Type: SSH_FXP_LSTAT, Size: 54, Number: 862727
< 2007-06-15 15:26:10.080 Type: SSH_FXP_STATUS, Size: 62, Number: 862727
< 2007-06-15 15:26:10.080 Status/error code: 2
> 2007-06-15 15:26:10.080 Type: SSH_FXP_REMOVE, Size: 41, Number: 862989
< 2007-06-15 15:26:10.095 Type: SSH_FXP_STATUS, Size: 34, Number: 862989
< 2007-06-15 15:26:10.095 Status/error code: 0
. 2007-06-15 15:26:10.095 Opening remote file.
> 2007-06-15 15:26:10.095 Type: SSH_FXP_OPEN, Size: 67, Number: 863235
< 2007-06-15 15:26:10.095 Type: SSH_FXP_HANDLE, Size: 13, Number: 863235
> 2007-06-15 15:26:10.111 Type: SSH_FXP_WRITE, Size: 16380, Number: 863750
. 2007-06-15 15:26:23.751 1292 skipped SSH_FXP_WRITE, SSH_FXP_READ, SSH_FXP_DATA and SSH_FXP_STATUS packets.
> 2007-06-15 15:26:23.751 Type: SSH_FXP_CLOSE, Size: 13, Number: 1029892
< 2007-06-15 15:26:23.751 Type: SSH_FXP_STATUS, Size: 34, Number: 1028614
< 2007-06-15 15:26:23.767 Type: SSH_FXP_STATUS, Size: 34, Number: 1028870
< 2007-06-15 15:26:23.783 Type: SSH_FXP_STATUS, Size: 34, Number: 1029126
< 2007-06-15 15:26:23.798 Type: SSH_FXP_STATUS, Size: 34, Number: 1029382
< 2007-06-15 15:26:23.814 Type: SSH_FXP_STATUS, Size: 34, Number: 1029638
< 2007-06-15 15:26:23.814 Type: SSH_FXP_STATUS, Size: 34, Number: 1029892
< 2007-06-15 15:26:23.814 Status/error code: 0
> 2007-06-15 15:26:23.814 Type: SSH_FXP_RENAME, Size: 86, Number: 1030162
< 2007-06-15 15:26:23.829 Type: SSH_FXP_STATUS, Size: 34, Number: 1030162
< 2007-06-15 15:26:23.829 Status/error code: 0
> 2007-06-15 15:26:23.829 Type: SSH_FXP_SETSTAT, Size: 66, Number: 863497
< 2007-06-15 15:26:23.829 Type: SSH_FXP_STATUS, Size: 49, Number: 863497
< 2007-06-15 15:26:23.829 Status/error code: 8, Message: 863497, Server: The request is not supported. , Language: en
* 2007-06-15 15:26:23.829 (ETerminal) The server does not support the operation.
* 2007-06-15 15:26:23.829 Error code: 8
* 2007-06-15 15:26:23.829 Error message from server (en): The request is not supported.
* 2007-06-15 15:26:23.829 Request code: 9
. 2007-06-15 15:26:23.829 Asking user:
. 2007-06-15 15:26:23.829 Upload of file 'Alt120.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on 'Ignore

permission errors' option. ("The server does not support the operation.
. 2007-06-15 15:26:23.845 Error code: 8
. 2007-06-15 15:26:23.845 Error message from server (en): The request is not supported.
. 2007-06-15 15:26:23.845 Request code: 9")
* 2007-06-15 15:26:26.501 (EScpSkipFile) Upload of file 'Alt120.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists,

turn on 'Ignore permission errors' option.
* 2007-06-15 15:26:26.501 The server does not support the operation.
* 2007-06-15 15:26:26.501 Error code: 8
* 2007-06-15 15:26:26.501 Error message from server (en): The request is not supported.
* 2007-06-15 15:26:26.501 Request code: 9
. 2007-06-15 15:26:26.501 File: "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\ION212.xls"
. 2007-06-15 15:26:26.517 Copying "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\ION212.xls" to remote directory started.
. 2007-06-15 15:26:26.704 Binary transfer mode selected.
. 2007-06-15 15:26:26.704 Checking existence of file.
> 2007-06-15 15:26:26.704 Type: SSH_FXP_LSTAT, Size: 45, Number: 1030407
< 2007-06-15 15:26:26.704 Type: SSH_FXP_ATTRS, Size: 112, Number: 1030407
. 2007-06-15 15:26:26.704 Checking existence of partially transfered file.
> 2007-06-15 15:26:26.704 Type: SSH_FXP_LSTAT, Size: 54, Number: 1030663
< 2007-06-15 15:26:26.720 Type: SSH_FXP_STATUS, Size: 62, Number: 1030663
< 2007-06-15 15:26:26.720 Status/error code: 2
> 2007-06-15 15:26:26.720 Type: SSH_FXP_REMOVE, Size: 41, Number: 1030925
< 2007-06-15 15:26:26.720 Type: SSH_FXP_STATUS, Size: 34, Number: 1030925
< 2007-06-15 15:26:26.720 Status/error code: 0
. 2007-06-15 15:26:26.720 Opening remote file.
> 2007-06-15 15:26:26.720 Type: SSH_FXP_OPEN, Size: 67, Number: 1031171
< 2007-06-15 15:26:26.720 Type: SSH_FXP_HANDLE, Size: 13, Number: 1031171
> 2007-06-15 15:26:27.282 Type: SSH_FXP_WRITE, Size: 16380, Number: 1031686
. 2007-06-15 15:26:30.876 338 skipped SSH_FXP_WRITE, SSH_FXP_READ, SSH_FXP_DATA and SSH_FXP_STATUS packets.
> 2007-06-15 15:26:30.876 Type: SSH_FXP_CLOSE, Size: 13, Number: 1075716
< 2007-06-15 15:26:30.892 Type: SSH_FXP_STATUS, Size: 34, Number: 1074438
< 2007-06-15 15:26:30.907 Type: SSH_FXP_STATUS, Size: 34, Number: 1074694
< 2007-06-15 15:26:30.923 Type: SSH_FXP_STATUS, Size: 34, Number: 1074950
< 2007-06-15 15:26:30.939 Type: SSH_FXP_STATUS, Size: 34, Number: 1075206
< 2007-06-15 15:26:30.939 Type: SSH_FXP_STATUS, Size: 34, Number: 1075462
< 2007-06-15 15:26:30.939 Type: SSH_FXP_STATUS, Size: 34, Number: 1075716
< 2007-06-15 15:26:30.939 Status/error code: 0
> 2007-06-15 15:26:30.939 Type: SSH_FXP_RENAME, Size: 86, Number: 1075986
< 2007-06-15 15:26:30.954 Type: SSH_FXP_STATUS, Size: 34, Number: 1075986
< 2007-06-15 15:26:30.954 Status/error code: 0
> 2007-06-15 15:26:30.954 Type: SSH_FXP_SETSTAT, Size: 66, Number: 1031433
< 2007-06-15 15:26:30.954 Type: SSH_FXP_STATUS, Size: 49, Number: 1031433
< 2007-06-15 15:26:30.954 Status/error code: 8, Message: 1031433, Server: The request is not supported. , Language: en
* 2007-06-15 15:26:30.954 (ETerminal) The server does not support the operation.
* 2007-06-15 15:26:30.954 Error code: 8
* 2007-06-15 15:26:30.954 Error message from server (en): The request is not supported.
* 2007-06-15 15:26:30.954 Request code: 9
. 2007-06-15 15:26:30.954 Asking user:
. 2007-06-15 15:26:30.954 Upload of file 'ION212.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on 'Ignore

permission errors' option. ("The server does not support the operation.
. 2007-06-15 15:26:30.954 Error code: 8
. 2007-06-15 15:26:30.954 Error message from server (en): The request is not supported.
. 2007-06-15 15:26:30.954 Request code: 9")
* 2007-06-15 15:26:33.860 (EScpSkipFile) Upload of file 'ION212.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists,

turn on 'Ignore permission errors' option.
* 2007-06-15 15:26:33.860 The server does not support the operation.
* 2007-06-15 15:26:33.860 Error code: 8
* 2007-06-15 15:26:33.860 Error message from server (en): The request is not supported.
* 2007-06-15 15:26:33.860 Request code: 9
. 2007-06-15 15:26:33.860 File: "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\Kaiser324.xls"
. 2007-06-15 15:26:33.876 Copying "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\Kaiser324.xls" to remote directory started.
. 2007-06-15 15:26:34.032 Binary transfer mode selected.
. 2007-06-15 15:26:34.032 Checking existence of file.
> 2007-06-15 15:26:34.032 Type: SSH_FXP_LSTAT, Size: 48, Number: 1076231
< 2007-06-15 15:26:34.048 Type: SSH_FXP_ATTRS, Size: 112, Number: 1076231
. 2007-06-15 15:26:34.048 Checking existence of partially transfered file.
> 2007-06-15 15:26:34.048 Type: SSH_FXP_LSTAT, Size: 57, Number: 1076487
< 2007-06-15 15:26:34.048 Type: SSH_FXP_STATUS, Size: 62, Number: 1076487
< 2007-06-15 15:26:34.048 Status/error code: 2
> 2007-06-15 15:26:34.048 Type: SSH_FXP_REMOVE, Size: 44, Number: 1076749
< 2007-06-15 15:26:34.048 Type: SSH_FXP_STATUS, Size: 34, Number: 1076749
< 2007-06-15 15:26:34.048 Status/error code: 0
. 2007-06-15 15:26:34.048 Opening remote file.
> 2007-06-15 15:26:34.048 Type: SSH_FXP_OPEN, Size: 70, Number: 1076995
< 2007-06-15 15:26:34.064 Type: SSH_FXP_HANDLE, Size: 13, Number: 1076995
> 2007-06-15 15:26:34.064 Type: SSH_FXP_WRITE, Size: 16380, Number: 1077510
. 2007-06-15 15:26:48.532 1292 skipped SSH_FXP_WRITE, SSH_FXP_READ, SSH_FXP_DATA and SSH_FXP_STATUS packets.
> 2007-06-15 15:26:48.532 Type: SSH_FXP_CLOSE, Size: 13, Number: 1243652
< 2007-06-15 15:26:48.548 Type: SSH_FXP_STATUS, Size: 34, Number: 1242374
< 2007-06-15 15:26:48.563 Type: SSH_FXP_STATUS, Size: 34, Number: 1242630
< 2007-06-15 15:26:48.579 Type: SSH_FXP_STATUS, Size: 34, Number: 1242886
< 2007-06-15 15:26:48.594 Type: SSH_FXP_STATUS, Size: 34, Number: 1243142
< 2007-06-15 15:26:48.610 Type: SSH_FXP_STATUS, Size: 34, Number: 1243398
< 2007-06-15 15:26:48.610 Type: SSH_FXP_STATUS, Size: 34, Number: 1243652
< 2007-06-15 15:26:48.610 Status/error code: 0
> 2007-06-15 15:26:48.610 Type: SSH_FXP_RENAME, Size: 92, Number: 1243922
< 2007-06-15 15:26:48.610 Type: SSH_FXP_STATUS, Size: 34, Number: 1243922
< 2007-06-15 15:26:48.610 Status/error code: 0
> 2007-06-15 15:26:48.610 Type: SSH_FXP_SETSTAT, Size: 69, Number: 1077257
< 2007-06-15 15:26:48.610 Type: SSH_FXP_STATUS, Size: 49, Number: 1077257
< 2007-06-15 15:26:48.610 Status/error code: 8, Message: 1077257, Server: The request is not supported. , Language: en
* 2007-06-15 15:26:48.610 (ETerminal) The server does not support the operation.
* 2007-06-15 15:26:48.610 Error code: 8
* 2007-06-15 15:26:48.610 Error message from server (en): The request is not supported.
* 2007-06-15 15:26:48.610 Request code: 9
. 2007-06-15 15:26:49.063 Asking user:
. 2007-06-15 15:26:49.063 Upload of file 'Kaiser324.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on

'Ignore permission errors' option. ("The server does not support the operation.
. 2007-06-15 15:26:49.063 Error code: 8
. 2007-06-15 15:26:49.063 Error message from server (en): The request is not supported.
. 2007-06-15 15:26:49.063 Request code: 9")
* 2007-06-15 15:27:05.157 (EScpSkipFile) Upload of file 'Kaiser324.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists,

turn on 'Ignore permission errors' option.
* 2007-06-15 15:27:05.157 The server does not support the operation.
* 2007-06-15 15:27:05.157 Error code: 8
* 2007-06-15 15:27:05.157 Error message from server (en): The request is not supported.
* 2007-06-15 15:27:05.157 Request code: 9
. 2007-06-15 15:27:05.157 File: "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\StIvesNL842.xls"
. 2007-06-15 15:27:05.157 Copying "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\StIvesNL842.xls" to remote directory started.
. 2007-06-15 15:27:05.282 Binary transfer mode selected.
. 2007-06-15 15:27:05.282 Checking existence of file.
> 2007-06-15 15:27:05.282 Type: SSH_FXP_LSTAT, Size: 50, Number: 1244167
< 2007-06-15 15:27:05.297 Type: SSH_FXP_ATTRS, Size: 112, Number: 1244167
. 2007-06-15 15:27:05.297 Checking existence of partially transfered file.
> 2007-06-15 15:27:05.297 Type: SSH_FXP_LSTAT, Size: 59, Number: 1244423
< 2007-06-15 15:27:05.297 Type: SSH_FXP_STATUS, Size: 62, Number: 1244423
< 2007-06-15 15:27:05.297 Status/error code: 2
> 2007-06-15 15:27:05.297 Type: SSH_FXP_REMOVE, Size: 46, Number: 1244685
< 2007-06-15 15:27:05.297 Type: SSH_FXP_STATUS, Size: 34, Number: 1244685
< 2007-06-15 15:27:05.297 Status/error code: 0
. 2007-06-15 15:27:05.297 Opening remote file.
> 2007-06-15 15:27:05.297 Type: SSH_FXP_OPEN, Size: 72, Number: 1244931
< 2007-06-15 15:27:05.313 Type: SSH_FXP_HANDLE, Size: 13, Number: 1244931
> 2007-06-15 15:27:05.328 Type: SSH_FXP_WRITE, Size: 16380, Number: 1245446
. 2007-06-15 15:27:18.297 1214 skipped SSH_FXP_WRITE, SSH_FXP_READ, SSH_FXP_DATA and SSH_FXP_STATUS packets.
> 2007-06-15 15:27:18.297 Type: SSH_FXP_CLOSE, Size: 13, Number: 1401604
< 2007-06-15 15:27:18.312 Type: SSH_FXP_STATUS, Size: 34, Number: 1400326
< 2007-06-15 15:27:18.328 Type: SSH_FXP_STATUS, Size: 34, Number: 1400582
< 2007-06-15 15:27:18.359 Type: SSH_FXP_STATUS, Size: 34, Number: 1400838
< 2007-06-15 15:27:18.375 Type: SSH_FXP_STATUS, Size: 34, Number: 1401094
< 2007-06-15 15:27:18.391 Type: SSH_FXP_STATUS, Size: 34, Number: 1401350
< 2007-06-15 15:27:18.391 Type: SSH_FXP_STATUS, Size: 34, Number: 1401604
< 2007-06-15 15:27:18.391 Status/error code: 0
> 2007-06-15 15:27:18.391 Type: SSH_FXP_RENAME, Size: 96, Number: 1401874
< 2007-06-15 15:27:18.391 Type: SSH_FXP_STATUS, Size: 34, Number: 1401874
< 2007-06-15 15:27:18.391 Status/error code: 0
> 2007-06-15 15:27:18.391 Type: SSH_FXP_SETSTAT, Size: 71, Number: 1245193
< 2007-06-15 15:27:18.406 Type: SSH_FXP_STATUS, Size: 49, Number: 1245193
< 2007-06-15 15:27:18.406 Status/error code: 8, Message: 1245193, Server: The request is not supported. , Language: en
* 2007-06-15 15:27:18.406 (ETerminal) The server does not support the operation.
* 2007-06-15 15:27:18.406 Error code: 8
* 2007-06-15 15:27:18.406 Error message from server (en): The request is not supported.
* 2007-06-15 15:27:18.406 Request code: 9
. 2007-06-15 15:27:18.406 Asking user:
. 2007-06-15 15:27:18.406 Upload of file 'StIvesNL842.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on

'Ignore permission errors' option. ("The server does not support the operation.
. 2007-06-15 15:27:18.406 Error code: 8
. 2007-06-15 15:27:18.406 Error message from server (en): The request is not supported.
. 2007-06-15 15:27:18.406 Request code: 9")
* 2007-06-15 15:28:45.201 (EScpSkipFile) Upload of file 'StIvesNL842.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem

persists, turn on 'Ignore permission errors' option.
* 2007-06-15 15:28:45.201 The server does not support the operation.
* 2007-06-15 15:28:45.201 Error code: 8
* 2007-06-15 15:28:45.201 Error message from server (en): The request is not supported.
* 2007-06-15 15:28:45.201 Request code: 9
. 2007-06-15 15:28:45.201 File: "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\StIvesUK834.xls"
. 2007-06-15 15:28:45.201 Copying "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\StIvesUK834.xls" to remote directory started.
. 2007-06-15 15:28:45.310 Binary transfer mode selected.
. 2007-06-15 15:28:45.310 Checking existence of file.
> 2007-06-15 15:28:45.310 Type: SSH_FXP_LSTAT, Size: 50, Number: 1402119
< 2007-06-15 15:28:45.326 Type: SSH_FXP_ATTRS, Size: 112, Number: 1402119
. 2007-06-15 15:28:45.326 Checking existence of partially transfered file.
> 2007-06-15 15:28:45.326 Type: SSH_FXP_LSTAT, Size: 59, Number: 1402375
< 2007-06-15 15:28:45.326 Type: SSH_FXP_STATUS, Size: 62, Number: 1402375
< 2007-06-15 15:28:45.326 Status/error code: 2
> 2007-06-15 15:28:45.326 Type: SSH_FXP_REMOVE, Size: 46, Number: 1402637
< 2007-06-15 15:28:45.326 Type: SSH_FXP_STATUS, Size: 34, Number: 1402637
< 2007-06-15 15:28:45.326 Status/error code: 0
. 2007-06-15 15:28:45.326 Opening remote file.
> 2007-06-15 15:28:45.326 Type: SSH_FXP_OPEN, Size: 72, Number: 1402883
< 2007-06-15 15:28:45.341 Type: SSH_FXP_HANDLE, Size: 13, Number: 1402883
> 2007-06-15 15:28:45.357 Type: SSH_FXP_WRITE, Size: 16380, Number: 1403398
. 2007-06-15 15:28:57.638 1214 skipped SSH_FXP_WRITE, SSH_FXP_READ, SSH_FXP_DATA and SSH_FXP_STATUS packets.
> 2007-06-15 15:28:57.638 Type: SSH_FXP_CLOSE, Size: 13, Number: 1559556
< 2007-06-15 15:28:57.638 Type: SSH_FXP_STATUS, Size: 34, Number: 1558278
< 2007-06-15 15:28:57.654 Type: SSH_FXP_STATUS, Size: 34, Number: 1558534
< 2007-06-15 15:28:57.669 Type: SSH_FXP_STATUS, Size: 34, Number: 1558790
< 2007-06-15 15:28:57.701 Type: SSH_FXP_STATUS, Size: 34, Number: 1559046
< 2007-06-15 15:28:57.701 Type: SSH_FXP_STATUS, Size: 34, Number: 1559302
< 2007-06-15 15:28:57.701 Type: SSH_FXP_STATUS, Size: 34, Number: 1559556
< 2007-06-15 15:28:57.701 Status/error code: 0
> 2007-06-15 15:28:57.701 Type: SSH_FXP_RENAME, Size: 96, Number: 1559826
< 2007-06-15 15:28:57.716 Type: SSH_FXP_STATUS, Size: 34, Number: 1559826
< 2007-06-15 15:28:57.716 Status/error code: 0
> 2007-06-15 15:28:57.716 Type: SSH_FXP_SETSTAT, Size: 71, Number: 1403145
< 2007-06-15 15:28:57.716 Type: SSH_FXP_STATUS, Size: 49, Number: 1403145
< 2007-06-15 15:28:57.716 Status/error code: 8, Message: 1403145, Server: The request is not supported. , Language: en
* 2007-06-15 15:28:57.716 (ETerminal) The server does not support the operation.
* 2007-06-15 15:28:57.716 Error code: 8
* 2007-06-15 15:28:57.716 Error message from server (en): The request is not supported.
* 2007-06-15 15:28:57.716 Request code: 9
. 2007-06-15 15:28:57.716 Asking user:
. 2007-06-15 15:28:57.716 Upload of file 'StIvesUK834.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on

'Ignore permission errors' option. ("The server does not support the operation.
. 2007-06-15 15:28:57.716 Error code: 8
. 2007-06-15 15:28:57.716 Error message from server (en): The request is not supported.
. 2007-06-15 15:28:57.716 Request code: 9")
* 2007-06-15 15:29:09.638 (EScpSkipFile) Upload of file 'StIvesUK834.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem

persists, turn on 'Ignore permission errors' option.
* 2007-06-15 15:29:09.638 The server does not support the operation.
* 2007-06-15 15:29:09.638 Error code: 8
* 2007-06-15 15:29:09.638 Error message from server (en): The request is not supported.
* 2007-06-15 15:29:09.638 Request code: 9
. 2007-06-15 15:29:09.638 File: "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\Topac451.xls"
. 2007-06-15 15:29:09.638 Copying "F:\xxxx\Quotation and MI System\Reporting\Clone\testing\Topac451.xls" to remote directory started.
. 2007-06-15 15:29:09.747 Binary transfer mode selected.
. 2007-06-15 15:29:09.747 Checking existence of file.
> 2007-06-15 15:29:09.747 Type: SSH_FXP_LSTAT, Size: 47, Number: 1560071
< 2007-06-15 15:29:09.763 Type: SSH_FXP_ATTRS, Size: 112, Number: 1560071
. 2007-06-15 15:29:09.763 Checking existence of partially transfered file.
> 2007-06-15 15:29:09.763 Type: SSH_FXP_LSTAT, Size: 56, Number: 1560327
< 2007-06-15 15:29:09.778 Type: SSH_FXP_STATUS, Size: 62, Number: 1560327
< 2007-06-15 15:29:09.778 Status/error code: 2
> 2007-06-15 15:29:09.778 Type: SSH_FXP_REMOVE, Size: 43, Number: 1560589
< 2007-06-15 15:29:09.794 Type: SSH_FXP_STATUS, Size: 34, Number: 1560589
< 2007-06-15 15:29:09.794 Status/error code: 0
. 2007-06-15 15:29:09.794 Opening remote file.
> 2007-06-15 15:29:09.794 Type: SSH_FXP_OPEN, Size: 69, Number: 1560835
< 2007-06-15 15:29:09.810 Type: SSH_FXP_HANDLE, Size: 13, Number: 1560835
> 2007-06-15 15:29:09.810 Type: SSH_FXP_WRITE, Size: 16380, Number: 1561350
. 2007-06-15 15:29:12.731 122 skipped SSH_FXP_WRITE, SSH_FXP_READ, SSH_FXP_DATA and SSH_FXP_STATUS packets.
> 2007-06-15 15:29:12.731 Type: SSH_FXP_CLOSE, Size: 13, Number: 1577732
< 2007-06-15 15:29:12.763 Type: SSH_FXP_STATUS, Size: 34, Number: 1576454
< 2007-06-15 15:29:12.794 Type: SSH_FXP_STATUS, Size: 34, Number: 1576710
< 2007-06-15 15:29:12.841 Type: SSH_FXP_STATUS, Size: 34, Number: 1576966
< 2007-06-15 15:29:12.872 Type: SSH_FXP_STATUS, Size: 34, Number: 1577222
< 2007-06-15 15:29:12.888 Type: SSH_FXP_STATUS, Size: 34, Number: 1577478
< 2007-06-15 15:29:12.888 Type: SSH_FXP_STATUS, Size: 34, Number: 1577732
< 2007-06-15 15:29:12.888 Status/error code: 0
> 2007-06-15 15:29:12.888 Type: SSH_FXP_RENAME, Size: 90, Number: 1578002
< 2007-06-15 15:29:12.903 Type: SSH_FXP_STATUS, Size: 34, Number: 1578002
< 2007-06-15 15:29:12.903 Status/error code: 0
> 2007-06-15 15:29:12.903 Type: SSH_FXP_SETSTAT, Size: 68, Number: 1561097
< 2007-06-15 15:29:12.919 Type: SSH_FXP_STATUS, Size: 49, Number: 1561097
< 2007-06-15 15:29:12.919 Status/error code: 8, Message: 1561097, Server: The request is not supported. , Language: en
* 2007-06-15 15:29:12.919 (ETerminal) The server does not support the operation.
* 2007-06-15 15:29:12.919 Error code: 8
* 2007-06-15 15:29:12.919 Error message from server (en): The request is not supported.
* 2007-06-15 15:29:12.919 Request code: 9
. 2007-06-15 15:29:12.919 Asking user:
. 2007-06-15 15:29:12.919 Upload of file 'Topac451.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on 'Ignore

permission errors' option. ("The server does not support the operation.
. 2007-06-15 15:29:12.919 Error code: 8
. 2007-06-15 15:29:12.919 Error message from server (en): The request is not supported.
. 2007-06-15 15:29:12.919 Request code: 9")
* 2007-06-15 15:29:16.513 (EScpSkipFile) Upload of file 'Topac451.xls' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists,

turn on 'Ignore permission errors' option.
* 2007-06-15 15:29:16.513 The server does not support the operation.
* 2007-06-15 15:29:16.513 Error code: 8
* 2007-06-15 15:29:16.513 Error message from server (en): The request is not supported.
* 2007-06-15 15:29:16.513 Request code: 9
. 2007-06-15 15:29:16.513 Listing directory "/XYZ_Upload/testing".
> 2007-06-15 15:29:16.513 Type: SSH_FXP_OPENDIR, Size: 30, Number: 1578251
< 2007-06-15 15:29:16.528 Type: SSH_FXP_HANDLE, Size: 13, Number: 1578251
> 2007-06-15 15:29:16.528 Type: SSH_FXP_READDIR, Size: 13, Number: 1578508
< 2007-06-15 15:29:16.544 Type: SSH_FXP_NAME, Size: 502, Number: 1578508
> 2007-06-15 15:29:16.544 Type: SSH_FXP_READDIR, Size: 13, Number: 1578764
< 2007-06-15 15:29:16.559 Type: SSH_FXP_STATUS, Size: 44, Number: 1578764
< 2007-06-15 15:29:16.559 Status/error code: 1
> 2007-06-15 15:29:16.559 Type: SSH_FXP_CLOSE, Size: 13, Number: 1579012


Your comments would be appreciated

regards

B

kls9036 wrote:

Is there any further information on this?

Not yet. I wan't able to find out whether this is client-side or server-side problem.

Is there any further information on this? The last I see is a log file was posted a couple of weeks ago. We are having the same problem here. WinSCP 3.8.2 (Build 330). Using Windows XP to upload to a Novell server. I don't think it is an actual permissions problem because the directory I am trying to upload to is my personal home directory on the Novell server.

Thanks

Sorry, misunderstood on posting log file earlier.
Connection start on 2007-03-07 16:30:49.573 with all files uploaded successfully. Please use manifest_info_ANZ_0162800_ACK.xml for reference.
Thanks.

. 2007-03-07 16:02:01.620 --------------------------------------------------------------------------
. 2007-03-07 16:02:01.620 WinSCP Version 3.8.2 (Build 330) (OS 5.0.2195 Service Pack 4)
. 2007-03-07 16:02:01.620 Login time: Wednesday, March 07, 2007 4:02:01 PM
. 2007-03-07 16:02:01.620 --------------------------------------------------------------------------
. 2007-03-07 16:02:01.620 Session name: [email protected]
. 2007-03-07 16:02:01.620 Host name: 10.10.10.10 (Port: 22)
. 2007-03-07 16:02:01.620 User name: USRpg (Password: Yes, Key file: No)
. 2007-03-07 16:02:01.620 Transfer Protocol: SFTP (SCP)
. 2007-03-07 16:02:01.636 SSH protocol version: 2; Compression: No